Mold mainly consists of four parts: the mold base, the next mold base, guide column, guide sleeve; precision mold processing

First, mold base. Belongs to the standard parts, according to production needs to choose the right steel, its rigidity, deformation coefficient and other physical properties have requirements.

1, mold base shape is divided into round and rectangular.

2, with mold handle mold base. According to the press situation, the manufacture of one or several specifications of the common mold handle, and then parts made of convex, die.

On the general punching, blanking, bending, simple drawing, school shape, etc., can use this method. Commonly used in small quantities and more varieties of stamping parts production.

Second, guide posts and guide sleeve. Is to guide the guide of the mold guide.

Standard mold processing equipment is mainly milling machine, grinder, drilling. Milling machine, grinder 6 bright surface processing to the required size. Drilling machine will die on the frame of the less demanding precision of the hole: such as screw holes, hole drilling holes, Tapping. The most basic requirement of a standard mold frame is that it needs smooth mold opening. Open the mold smoothly or not, and the precision of the four guide post hole is directly related. So generally need to use CNC vertical machining center for rapid drilling and then boring in order to achieve precision.

Non-standard formwork is based on the above-mentioned standardized formwork, and then finishing. Finishing here refers to the mold cavity (mold frame), fine positioning, lock module, waterway (heating / cooling fluid passage), thimble hole . This allows moldmakers to load test molds and plastic products directly into their machined mold cores.