Mold is the mold half the finished product, with a variety of steel parts with the composition, it can be said that the entire mold skeleton. Due to the large differences between the molds and the molds involved, the moldmakers will choose to order mold bases with the moldbase manufacturers to take advantage of the production advantages of both to enhance the overall production quality and efficiency.

After years of development, mold production industry has been quite mature. Mold manufacturers in addition to the needs of individual molds, build custom-made molds, but also choose the standard mold products. The standard formwork models are diversified, and delivery times are short, or even out-of-the-box, offering moldmakers greater flexibility. Therefore, the popularity of the standard mold is continuously improved. Non-standard formwork

High-performance secondary ejector mold structure includes the front panel, the front template, the rear template, the thimble panel, the thimble bottom plate, the bottom plate, the ejection rod, the insert needle, the spring, the thimble, the front mold core and the back mold core. , The product's ejector rod is arranged on the thimble bottom plate of the product, the product's spring is arranged on the ejector rod, the product's spring is positioned and guided by the insert pin, the product's ejector rod passes through the thimble plate and the ejector plate, The thimble panel, the thimble bottom plate and the ejector rod are positioned and installed; the thimble bottom plate of the product is located at the lower end of the thimble plate panel; the front panel of the product is arranged on the top of the front mold plate; the front mold core of the product is arranged in the front mold plate; Template; a simple and effective secondary ejection mode, the standard mold does not need additional thimble plate wall to avoid the cost of non-standard mold frame, simplifying the mold structure, saving costs, increased Work efficiency.